STM32F0 MCUs offer real-time performance and low-power operation for cost-sensitive applications
TLP241B - 100V Fast Responding High Current Photorelay for Industrial and Building Automation Equipment
Toshiba Electronics has introduced the TLP241B, a high current photorelay for industrial equipment such as programmable logic controllers and I/O interfaces. Integrated with the U-MOS process-based MOSFET, the TLP241B has an extended OFF-state output terminal voltage up to 100V. Housed in a DIP4 package, the TLP241A photorelay delivers 2A ON-state current and 5kV isolation voltage hence can be used in a variety of applications.
The absence of moving contacts makes it the best replacement for the 1-Form-A contact mechanical relay. With a fast response time, the device provides a low current drive for improving the product's life. In a PCB space-saving smaller package, the TLP241A can deliver a maximum operating temperature of 110°C.
This new photorelay can be used in industrial equipment such as programmable logic controllers in the I/O interface and various sensor controls. It can also be used as a replacement for mechanical relays and in Building automation systems such as heating, ventilation, air conditioning (HVAC), and thermostats.
Features of TLP241B High Current Photo Relay
- High ON-state current rating: ION = 2A, IONP = 6A (Pulsed)
- OFF-state output terminal voltage rating: VOFF = 100V
- High operating temperature rating: Topr max = 110℃
- General-purpose DIP4 package with gull-wing option (SMT) available
- Trigger LED current: 3 mA (max)
- ON-state current: 2.0 A (max)
- ON-state resistance: 200 m Ω
- Isolation voltage: 5000 Vrms (min)
Note: More technical information can be found in the TLP241B Photorelay Datasheet linked at the bottom of this page and on the TLP241B photorelay product page.
We will never spam you.
Be a part of our ever growing community.