KPJX-PM-4S DC Power Connector

12 August 2020 - 0 Comments

KPJX-PM-4S DC Power Connector

KPJX-PM-4S DC Power Connector Pinout

KPJX-PM-4S is a DC power connector from the KYCON which enables snap and lock features that prevent accidental disconnects. The connector could be used for high power DC connection inside a PCB board that is useful for power input operations in a circuit. This connector has four pins and all four pins are capable of transferring 48V DC with 7.5A of Maximum current.

Pin Description of KPJX-PM-4S

Pin Number	Pin Name	Description
1	Power PIN 1	This is a first power pin
2	Power PIN 2	This is a second power pin
3	Power PIN 3	This is a third power pin
4	Power PIN 4	This is a fourth power pin

Features and specification of KPJX-PM-4S

48V DC, 7.5A Maximum in all four pins
Insulation Resistance: 50 Meg-Ohms insulation at 250V DC
Dielectric Withstanding voltage: 500V AC for 1 minute
Contact Resistance: 30 milliohms Max.
Durability: 1000 Cycles
Wire AWG: #18 for power wires
The shield is made of Copper Alloy, Tin Plated
The body is made using PBT Thermoplastic
Power Pins are made using Brass material with Tin Plated

Note: Complete technical details can be found in the KPJX-PM-4S Datasheet linked at the bottom of this page.

Alternative product of KPJX-PM-4S Kycon Connectors

Replacement of this KPJX-PM-4S connectors-

KPJX-PM-3S

KPJX-PM-4S - Overview

KPJX-PM-4S is a DC power connector that features a Snap and Lock protection for an accidental disconnect. This is a connector that opens up a safer way to connect the DC input power into the PCB board. The connector offers the durability of 1000 cycles. It is made using PBT Thermoplastic with UL94 V-0 rated that is a durable material. It also has a Copper Alloy with a Tin-Plated shield inside the connector.

It has four Power pins that are made with Tin-Plated Brass materials that support power delivery of 48V DC with 7.5A of current. All pins provide a low contact resistance of 30 milliohms maximum. However, The connector offers 50 Megohms of Insulation Resistance at 250V DC and Dielectric withstanding voltage of 500V AC for 1 Minute. It is suggested that for the Power Wires, use #18 AWG wire.